Comments

Building a wooden arbor: good practices

Building a wooden arbor: good practices


We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Determine the location of the wooden arbor

Before thinking about building your wooden arbor, you need to choose its location. Thus, you will be able to determine the type of arbor to favor. There are indeed different types of wooden arbors:

  • The classic arbor: mounted on 4 wooden feet, it is often covered with a tarp or stretched canvas. Its more or less large width allows you to install a dining area.
  • The gazebo type arbor: hexagonal in shape, it is often made up of a sloping roof. The kiosk is more suitable for a relaxation area than a place to set up a table, because of its often small size.
  • The attached arbor: it can shelter your terrace from rain and wind. Leaning against a wall of the house, you can cover it with climbing plants to add shade to your terrace.
  • The pergola: it is often built on stone or brick pillars. It can be attached or built in the heart of your garden.

You can also choose the size and shape of your structure. It is up to you to choose later if you opt for a kit or if you embark on the construction of your own wooden arbor.

Choose the arbor wood

The choice of wood is essential because it determines the life of your arbor. It is recommended to choose a rot-proof wood. This type of wood is particularly suitable for outdoor use: it is resistant to humidity as well as temperature variations and weather conditions.

You can opt for regional wood such as cedar or pine, but also think of imported wood known for its great resistance such as teak. Generally, prefer resistant woods, even if they are a little more expensive.

Build the arbor


The first step in building your wooden arbor consists of preparing each piece of wood and then assembling the different elements of the structure. Make sure you have the necessary equipment for this step.

For build your wooden arbor yourself, it is important to have the following equipment:

  • Wooden poles
  • Lag bolts
  • Fixing plates
  • Rafters
  • Joists
  • Wood screws
  • A drill
  • A screwdriver
  • Carpenter's pencil
  • A handsaw
  • A hammer
  • A bracket
  • A bubble level
  • A stepladder

You will need fasteners adapted to the size of the pieces of wood and especially their location on the arbor.

Once the structure of the arbor is assembled, you must fix the feet to the ground. If the ground is hard, opt for turntables. Screw them to the ground after taking the precise measurements of the location of the arbor then place the feet of the arbor there.

If you have opted for an attached arbor, also fix the part which is against your house.

The last stage of the assembly consists in placing the fabric which will protect your space under the arbor from the sun and possible bad weather. You just have to arrange the arbor and decorate it.

Good to know

It is possible to find very many wooden arbor plans on the Internet. Some individuals even offer personalized and free advice! So bet on DIY communities to save some money.

Editorial advice

Mount a wooden arbor is not very difficult but you must have notions of DIY to embark on the adventure. Do not hesitate to be accompanied at each stage of your project.

It is also essential to secure work by having the right tools and protecting yourself. Wear protective gloves, goggles and if using a stepladder, make sure it is properly secured to avoid the risk of falling.



Comments:

  1. Abhaya

    I hope they come to the correct decision.

  2. Dulabar

    I'm sorry, I can't help you with anything. I think you will find the right solution. Do not despair.

  3. Maduley

    I forgot to remind you.

  4. Cuauhtemoc

    In my opinion, he is wrong. Write to me in PM, it talks to you.

  5. Adley

    What you say



Write a message